8000 kg5730x1450x2040 mm26.5 m20.0 m

Reduced stabilization area, 8 ton max capacity, 27,5 m max working height, 2 ton pick & carry: a mini crane with unique features which make it incomparable on the market.


1 Hook & Pulley

JIB working with hook or pulley mode

Three different JIB

- 1.500 Kg Hydraulic flying JIB
- 1.500 Kg Lattice flying JIB
- 3.500 Kg Runner JIB

3 Hydraulic Grabber Manipulator

300 Kg pipe and beam manipulator

Pick & Carry

2 tons 360° rotating pick & carry capacity

Extendable Tracks

Independent extendable tracks to increase steering and 360° pick & carry

Power Pack

External three-phase power pack

7 Radio Remote Control

- Large display
- Proportional radio remote control with two batteries
- Crane and crawler control

8 Continuous 360° rotation
9 Electronic LMI

- Automatic stability control
- Plug & Play
- Diagnostic troubleshooting
- Friendly display with all the information
- Full safety respect EN13000

Virtual Wall

Anti-collision system with acquisition of the working area

Dimensions 5730 x 1450 x 2040 mm
Stabilization Area 4600 x 4600 mm
Weight kg
Crane SPX1280 7000
Counterweight 1500
Hookblock / Capacity 8T-D10 110
Jib JIB3500GX 70
JIB1501.3HL 680
JIB1501.1FL 270
JIB303GR.1FL 250
Engine (Diesel & Battery)
Engine KUBOTA V1505-E3B
Diesel Fuel Yes
Liquid Cooling Yes
Power 26,2 kW                                   35,0, Hp
Other Information
Main Winch 1500 kg                                       125 m – Ø 10 mm                         63,8-115,1 m/min
Max Outrigger Load 6800 kg
Max Track Load 0,72 kg/cm2
Travel Speed 1,5/3,0 km/h
Gradeability 20°
Extendable Tracks 1450-2050 mm

Standard Equipment

All basic equipment of mini cranes Jekko, From applications to accessories placed on all machines


1500 kg Capacity - 125 m Length - Ø 10 mm

Anti Two Block (A2B)

This switch prevents the hook from blocking or from being pulled against the boom end.

Crane-Carrier Interlock (CCI)

This system interlocks the functions of the crane and of the carrier.

Diagnostic Trouble Code (DTC)

Onboard diagnostic system for troubleshooting

Extendable Tracks (EXT)

Horizontally (SPX1040, SPX1275, SPK60) or 45° (SPB209, SPX312-424) extending tracks

Geometrical Sability Control (GSC)

Geometrical Stability Control (GSC) shows the position of each single outrigger and operating sector.

Load Moment Indicator (LMI)

The LMI prevents overload or tipping of the machine.

Pick & Carry (P&C)

The machine can move on its tracks while the load is lifted up.

Virtual Walls (VW)

Automatic setting of ‘virtual walls’ to restrict the working areas.

Two Speed Tracks (2ST)

Two Speed Winch (2SW)

Winch double speed.

Radio Control Display (RCD)

Display on the radio remote control showing the machinery  load information.

Single Line Hook

Hook for single line pull of the rope.

Transportation Anchor Points

Anchor points for handling and transport of the minicrane

Bubble Level

To check correct stabilization

LED Working Light

Light positioned on the boom for operation at nigh

Tower Lamp

Tower lights (green/yellow/red) that signal errors and dangers


The Jemmy software manages all the machine functions

Radio Remote Control + 2 batteries

Scanreco proportional multipurpose radio remote control with additional battery


SPX1280: Diesel Engine Kubota V1505-E3B - 26,2 kW - Diesel

Jib Hook or Winch Mode

Jib hook mode and winch mode are both possible.


All mini cranes Jekko can be customized depending on the industry for which they should be used.

Pulley Block

Pulley used to configure the different parts of line

Power Pack

400V or 220V additional electric motor (North America)

Runner Jib

Hook jib

Hydraulic Jib

Built-in and radio remote controlled hydraulic jib.

Luffing Jib

Lattice boom with varied angles and manual extension

Winter Kit

The Winter Kit warms up some components for operation at low temperatures

Visual Angle Indicator (VAI)

Working angle indicator, compulsory for North America

Hydraulic Extra Functions

Hydraulic activation for hydraulic accessories such as jibs and manipulators. It is necessary to deliver oil to the machine boom end.

Personalized Colour

Customized paint colour, choice of engine housing/boom or complete crane.

Grabber Pipe Manipulator

With quick-coupling


Software for telemetry and remote assistance

for further informations

Fill the form

I want to subscribe to Jekko newsletter

Ask more info

Save time, contact us!

Do you need any advice?
Fill out the fields in this form correctly, we will reply as soon as possible!

Call us:
1300 551 075